Hongsen products / Storage and parking
HS-T009 Wall Storage Rack or HS-T013B Floor Bike Stand?
Compare Hongsen HS-T009's covered hook and wall tray with HS-T013B's floor rails and detachable loop for bicycle storage and parking.
Hongsen’s HS-T009 stores a bicycle at the wall through a covered wheel hook and a long vertical tray. HS-T013B parks a bicycle on the floor through an L-shaped steel structure with a raised wheel loop. These two products organise the wheel in different ways, so the choice starts with how the bicycle should rest in storage.
HS-T009 combines a wall plate with a covered hook
HS-T009 has a long steel plate with four fixing holes arranged down its centre. A curved hook projects from the top, and its contact section has a covering. The plate continues below the hook, with a side frame beside the lower wheel area.
The hook provides the hanging point. The vertical tray and side frame organise the wheel position along the wall. Together, these parts form a wheel-based storage arrangement that holds the bicycle off the floor. The buyer is choosing a wall-mounted wheel position, with the plate’s fixing pattern as part of the installation.
This makes HS-T009 relevant to a product range that needs off-floor bicycle storage. The wheel meets the hook at the top of the rack, rather than entering a floor-level stand. Wall construction and the chosen fixing arrangement determine the installation, while the bicycle’s full shape determines its clearance from nearby objects.
HS-T013B places the front wheel inside a floor structure
HS-T013B has two parallel floor rails joined by crossbars. A tall loop rises at one end to create its L-shaped profile. The wheel enters between the rails and sits beside that loop; the rest of the bicycle remains in its normal upright parking position.
The front-wheel arrangement explains the stand’s use more clearly than the term floor rack alone. The base extends around the wheel at floor level, while the tall loop provides the raised part of the wheel position.
HS-T013B also has a detachable steel structure. The upright loop has joints where its sections connect during assembly, an additional construction difference from HS-T009’s plate-and-hook form.
Compare the storage form and the listed Size
| Product detail | HS-T009 | HS-T013B |
|---|---|---|
| Storage form | Wall mounted, bicycle off the floor | L-shaped floor parking stand |
| Main wheel structure | Covered curved hook above a vertical tray | Floor rails beside a tall loop |
| Other structural detail | Four fixing holes and a side frame | Crossbars and detachable connections |
| Material | Steel | Steel |
| Listed Size | 16″-29″x3.0″ | 16″-29″x2.6″ |
The wall hook and floor rails hold the wheel in different positions. Match the bicycle to the selected contact structure as well as the listed Size, particularly when comparing the same bicycle across both products.
Choose HS-T009 for a wall-mounted, off-floor storage proposal. Choose HS-T013B when the required product is an L-shaped floor parking stand with a detachable structure. Explore the wider storage and parking range, or ask Hongsen about these two models for your product range.