Bike Repair Stand Tool Trays on HS-QX-006D and HS-QX-006F

The tool trays on Hongsen HS-QX-006D and HS-QX-006F put divided storage below the bicycle clamp. Both give a mechanic somewhere at the stand to set down small items during a job. Their compartment layouts differ, so a buyer can compare how the tools and loose parts used together would sit in each tray.

HS-QX-006D has a rectangular tray with raised edges and internal dividers. HS-QX-006F combines a long front compartment with smaller rear sections and a round recess. That difference matters when choosing the working arrangement around the stand, even though both products are bike repair stands with an attached tray.

A divided tray beside the HS-QX-006D upright

The HS-QX-006D tray sits around the upright column, below the horizontal clamp arm. The tray remains beside the column while the clamp projects outward. A mechanic therefore works between two nearby areas, the bicycle at the clamp and the tray lower down at the stand.

Raised edges define the tray’s outside boundary. Dividers split its rectangular interior into separate areas, giving the user a way to keep loose parts apart during a repair. Small items removed at different stages can occupy different sections rather than sharing one open surface.

The tray also has openings along its edges. Compare their shape and spacing with the tools intended for the workstation. For a distributor selecting a complete repair stand, this is a useful detail to show alongside the overall product view. A customer can see the storage layout as part of the assembled stand, rather than judging the tray from a model name alone.

The HS-QX-006F tray separates long and small items

On HS-QX-006F, a long compartment runs across the front of the tray. Behind it are two smaller rectangular compartments and a round recessed area. The larger front area and smaller rear areas make the division of space easy to see.

This arrangement gives the buyer a practical comparison with 006D. Start with a group of items used in one service task. Longer items can be considered against the front compartment, while the smaller sections provide separate places for loose parts. Check the actual items against the tray before defining the workshop kit or retail bundle.

Round openings run along the near edge, and open-ended notches sit at the right side. These edge shapes are another difference to examine when deciding how the tools will be arranged. Their presence does not make every tool a match; the useful comparison is the tool’s shape against the particular opening.

Choose the complete stand around the work position

The tray is one part of the repair stand. Its position below the clamp connects storage to the bicycle’s working area, so keep access to both in view when comparing models. A tray with suitable divisions is useful only if the mechanic can reach it from the intended side of the bicycle.

Choose between these layouts by how the working items separate across the tray. The 006D offers a divided rectangular arrangement. The 006F adds a clear long front section and a round rear recess. Explore the Hongsen bike repair stand range for the complete models, or contact Hongsen about the tray layout required for your repair stand range.