The Raised-End Platform on the HS-H028 Bicycle Rear Rack

Hongsen HS-H028 combines a long carrying platform with a raised panel at one end. The metal surface continues from the horizontal deck into the upright section, with a tubular frame around its outside. For a buyer choosing a bicycle rear rack, this creates a different cargo-contact shape from a flat platform with an open end.

The deck and raised end need to be considered together. An item placed along the platform meets a horizontal surface beneath it and a vertical face at the end. Its intended position therefore depends on the shape of the whole platform, rather than the top view alone.

Follow the surface around the raised end

The HS-H028 has a ribbed central metal deck. At one end, that surface bends upward inside the tall part of the outer tubular frame. The surrounding tube follows the platform’s sides and curves around its opposite end.

The raised panel gives this rack a defined end face. A bag or other carried item needs to sit on the horizontal deck while allowing for that face. A rigid item with a long base meets the platform differently from a smaller item that fits within its horizontal section. Compare the actual base shape with the surface it will rest on.

The tubes beside the deck remain separate from the central metal surface. Together, their outlines show both the carrying area and its outer edges. For a dealer selecting a rear-rack range, an angled view makes this distinction clearer than a flat silhouette. It shows where the deck finishes and where the upright section begins.

Keep cargo placement separate from the lower supports

Beneath the platform, paired lower members descend toward mounting tabs with elongated holes. Other angled tubes connect the platform area to the lower structure. These parts sit below the carrying surface, so they form another part of the rack’s relationship with the bicycle.

The deck shape and bicycle fit are separate choices. Match the lower mounting positions and the space above the rear wheel to the intended bicycle. This lets a buyer select a cargo platform while checking how the complete rack mounts.

HS-H028 is a useful model to compare when the required rear rack has a continuous metal deck and an upright end panel. Compare the raised end and deck as the carrying area, then check the lower supports against the bicycle’s mounting positions. Explore the Hongsen rear luggage rack range for other platform forms, or contact Hongsen about HS-H028 for your bicycle accessory range.