Hongsen products / Vertical bicycle storage
How HS-T051 Uses a Floor-to-Ceiling Column for Bicycle Storage
See how HS-T051 combines an adjustable floor-to-ceiling column with bicycle support arms to arrange horizontal bicycle positions at separate heights.
Hongsen’s HS-T051 arranges bicycle storage around an upright column between the floor and ceiling. Support arms extend from the column at separate heights, allowing horizontal bicycle positions to use the room’s height. The bicycle frames rest on the arms while their wheels hang clear of the floor.
The column and its arms solve different parts of that arrangement. The column occupies the floor-to-ceiling position; the arms create the contact points for the bicycle frames. Choosing where to put the stand therefore involves both the room’s vertical space and the space each bicycle occupies beside the column.
Follow the column from floor to ceiling
HS-T051 has contact heads at the bottom and top of its upright. The upper part extends to suit the installation height, with an adjustable range recorded as 1.75 to 3.2 metres. This gives the stand its floor-to-ceiling form and keeps the bicycle-support structure on one vertical line.
The measured height at that line matters. A sloping ceiling or a change in floor level changes the two contact positions, even within the same room. Select the stand location against its actual floor and ceiling surfaces, with the required contact arrangement agreed for those surfaces.
Give each bicycle space beside the support arms
The projecting arms hold the bicycle at its frame, leaving the wheels on either side of the column. Vertically separated sets of arms place one bicycle position above another. The result is stacked storage with the bicycles remaining horizontal, which makes the height between positions relevant to loading and removal.
The bicycle’s outline extends beyond the arm contact points. Handlebars project towards the room, and wheels occupy space along the wall. Leave access to lift the frame onto its supports and take it away without contact with the bicycle below or nearby furniture.
For a dealer planning this storage format, the frame-support arrangement is part of the model choice. Match the supported frame section to the intended bicycles and agree the required arm configuration with the installation conditions. Browse the Hongsen storage range for other formats, or contact Hongsen about HS-T051 for your planned space.