Hongsen products / Product structure and use
HS-QX-003AK Remote Cable and Trainer Frame Layout
See where the HS-QX-003AK remote cable connects, how it sits beside the axle supports, and which model details belong in a buyer request.
The HS-QX-003AK is a steel magnetic bike trainer with a cable running from the lower resistance unit to a separate round hand control. Its photos show the control away from the resistance housing and available near the rider. The bicycle remains supported at the rear axle between two upper fittings, while the tire meets the roller below. This article explains the visible cable route and the frame areas a buyer can identify before requesting the current control specification.
The control is separate from the resistance housing
The cable leaves the black magnetic housing mounted low on one side of the frame. It crosses the open area inside the trainer and ends at a round black control. In the complete product image, the controller is not fixed to an upright or axle fitting. The installed-bike image places the cable forward from the trainer towards the rider.
This gives distributors a precise product-detail story. HS-QX-003AK includes a cabled remote control as part of the pictured arrangement. The current source does not state the number of control positions, so the approved product sheet should use the current supplier specification for that field.
The upper fittings and lower roller have different jobs
The two top fittings face each other across the trainer and align with the bicycle’s rear axle. The magnetic housing and roller sit below the axle line beside the rear tire. The cable connects to this lower resistance area. It does not form part of the bicycle’s axle connection.
Showing both the frame-only view and an installed-bicycle view helps a buyer understand that relationship. The first exposes the cable and support structure. The second shows where the rider, rear axle and tire sit relative to those parts.
Confirm the control specification with the model
The current catalog lists steel plus magnetic motor, a 26 to 29 inch size range and a 7/8 kg N.W./G.W. pair for HS-QX-003AK. Include the exact model suffix in any document request because nearby models use related frames with different visible fittings.
See the HS-QX-003AK product page and indoor bike trainer range. Contact Hongsen with the bicycle details and the control information required for your market.