Hongsen products / Product structure and use
What to Measure for the HS-Z011 Kickstand Clamp Area
Learn which frame-area measurements help review the HS-Z011 clamp plates, circular band, support leg and surrounding bicycle clearance.
The HS-Z011 has a compact upper clamp area built from formed plates, visible fasteners and a circular band at the outer end. Its long support leg begins below a larger pivot housing. A useful fit review must capture the shape and available length of the target frame area, not just the bicycle wheel size. The clamp geometry and the surrounding bicycle parts decide whether the proposed position is workable.
Start with the target frame section
The complete product view shows the upper assembly as a sequence of metal sections. The circular end band, flat connecting arm and wider central plates occupy different planes. The support leg then extends away from the larger housing.
Ask the bicycle team for a side view and a cross-section measurement at the proposed mounting area. Record the tube or stay width, its shape and the clear length around it. Include any weld, cable guide, brake hose or guard near that position. These details show whether the clamp area has enough uninterrupted space and whether the support leg can move without meeting another component.
Match the plate stack to the bicycle space
The close view separates the circular band from the flat arm and larger formed plates. Several fasteners join the sections. This is useful for an OEM drawing because one overall width cannot describe the whole assembly. Mark the bicycle contact zone, the fastener side and the direction in which the leg folds.
The current HS-Z011 record lists semi-aluminum construction and a 24 to 29 inch size field. Use that size field to organize the product range, then confirm every target bicycle at its actual mounting area. A 29 inch bicycle with a crowded frame section can require more review than a smaller bicycle with a clear mounting zone.
The sample check should confirm the chosen side, the available space around the clamp and the leg position in use and during riding. Keep that approved bicycle and HS-Z011 combination in the order record so later production follows the same fit basis.
See the Hongsen bicycle kickstand range or send the target bicycle details for model review.