Choosing a Floor Bike Parking Rack by Wheel Support Layout

A floor bike parking rack can hold one bicycle at a separate position or organize several wheel positions on a shared base. The wheel support determines where a bicycle enters, while the base determines how each position relates to its neighbours. Hongsen’s HS-T026AF, HS-T013CF and HS-T039B show three layouts a buyer can compare for a bicycle display or parking range.

Start with the intended arrangement. An individual stand lets a shop plan a bicycle’s position separately. A shared rack establishes a row of wheel positions on the same base. In both cases the bicycle extends beyond the stand, so its handlebars and the space needed to move it in and out belong in the layout.

HS-T026AF places contact around one wheel

The HS-T026AF has a low wheel guide between two lengthwise rails. The wheel rests in the guide and meets round contact pieces higher on the upright arms. A spring is visible beside the lower joint; the transverse feet extend beyond the wheel channel.

This format gives one bicycle its own floor position. For a dealer assessing it with a target bicycle, the tyre’s relationship to the lower guide and upper contact pieces is the important fit check. The HS-T026AF wheel-contact guide shows those parts in more detail.

HS-T013CF lets the buyer choose the bicycle's direction

The HS-T013CF has a low wheel support and a tall upright with two hooks positioned through mounting holes. It accepts either the front or rear wheel, leaving the bicycle in its normal riding orientation.

That choice changes which end of the bicycle points away from the stand. A shop can consider the direction of the handlebars and the side of the bicycle it wants to show before choosing a display position. The wheel’s diameter and tyre width still need to be checked against the support and hook positions. The front-or-rear wheel guide explains the two orientations.

HS-T039B joins wheel positions into a row

The HS-T039B has paired U-shaped wheel supports arranged along two parallel square-tube base rails. Each pair forms a wheel-entry position; the common rails connect those positions across the rack.

A buyer planning several bicycles should check the intended bicycles together, not only one tyre in one slot. The rack fixes the relationship between wheel positions. Handlebar width and the room needed to approach each position affect how the complete row can be used. An individual stand can be placed separately; the shared rails make the chosen row arrangement part of the product decision.

Choose the position before specifying the rack

For one display position, compare the T026AF wheel guide and upright contact pieces with the T013CF upright and its selectable wheel direction. For a group of bicycles, compare the T039B’s shared row with the actual bicycles and the space available around them.

For a site with bicycle security requirements, check the required frame-locking and rack-anchoring arrangements against the site specification before selecting the installation.

Explore the Hongsen storage and parking range. Contact Hongsen with the intended bicycle dimensions and layout to discuss the models.