Hongsen products / Product structure and use
Rear-Axle Bike Display Stand Support on HS-T008
See how HS-T008 supports a bicycle at the rear axle, with open slots above a bent steel base and contact points beside the wheel.
The HS-T008 rear-axle bike display stand supports the bicycle at the two ends of its rear axle. Open slots at the top of its steel legs receive the axle-end area, while the lower bent sections meet the floor. This places the stand’s support beside the hub, above the tire. For a dealer selecting a display stand, the bicycle’s axle-end shape is the important connection detail.
The HS-T008 product page shows this compact support format for bicycles displayed in their normal riding position.
Follow the support from the hub to the floor
Each side of HS-T008 has an upright section with an open-topped slot. The bicycle’s rear axle sits across these two positions. The stand therefore reaches up to the hub from both sides of the wheel, with the tire between its legs.
The lower steel sections turn outward and join the floor-level footprint. Their shape gives the axle supports a base on each side of the wheel. There is no long wheel channel underneath the tire in this arrangement. The contact height comes from the upright legs and the axle position.
This layout keeps the display support close to the rear wheel. The bicycle’s frame remains above it, so the stand does not need a tall post beside the top tube.
The axle end determines the connection
The open slot needs an accessible place at the axle end. Its position relative to the bicycle’s dropout and the surrounding hardware matters because these parts arrive together at the top of the stand. A protruding axle end and a recessed end present different shapes to that opening.
Dealers can use a close view of the intended bicycle’s rear hub to describe this connection. Include both sides, since the drive-side assembly occupies a different space from the opposite end. The useful comparison is between the slot and the actual axle hardware.
HS-T008 is a steel stand for this axle-supported display format. A tire-supported floor stand has a different contact path, as the wheel enters a lower guide instead. Browse the Hongsen bicycle storage and parking range to compare these forms, or contact Hongsen with HS-T008 and the rear-axle arrangement for your proposed bicycle range.