Twin Support Arms on the HS-T009A Bicycle Wall Hook

HS-T009A has two upward-curved support arms on one steel body. Blue covers extend over the curved ends where an item rests, and four fixing holes sit along the rear section. The twin-arm bicycle wall hook brings two separate contact positions out from the wall, so the supported section needs to reach across both arms.

The shape of the HS-T009A wall hook is useful to understand before selecting it for a bicycle storage range. Its paired arms and rear fixing section have different jobs within the same part.

Two contact positions on one bent body

The steel body forms a rounded loop at the rear and extends forward into two arms. Each arm bends upward at its end. The upward curve creates a shallow resting area behind the tip, while the blue cover separates that contact area from the exposed black steel farther back.

The two arms stand apart. A bicycle section placed across them meets the hook in two locations, so its shape across that distance matters. A straight section and a sharply changing section will approach the curved supports differently. The position of cables or accessories also matters where they pass near a covered end.

This contact layout makes the arm spacing part of the product choice. A dealer comparing wall hooks should relate that spacing to the section of the bicycle intended to rest there.

The fixing section stays behind the support arms

Four round holes run along the rear section, with two on each side. They place the wall connection behind the projecting arms. The bicycle contact is farther into the room, so the mounting surface and fixing arrangement form part of the complete installed structure.

An approved fixing arrangement needs to suit the actual wall. The four holes describe the hook’s mounting pattern; the wall structure determines the appropriate fixing hardware.

HS-T009A is a compact steel component with a visible separation between its rear fixing area and covered support ends. Browse the Hongsen storage and parking range for other contact forms. To discuss this twin-arm design, send Hongsen the intended bicycle contact section together with the HS-T009A model number.